In STREAMS, a comprehensive portfolio of at least 12 scalable and flexible technologies and pilot
scale solutions for the sustainable production of battery-grade precursors and their respective anode and cathode
active materials will be developed, evaluated and successfully demonstrated. These technological processes will be
applied to materials from primary and secondary sources including recycled battery mass and photovoltaic waste.
This will strengthen Europe’s domestic battery materials supply chain and reduce Europe’s dependency on imported
critical and strategic raw materials supplies. The production technologies will also increase Europe’s resilience,
competitiveness and strategic autonomy in the global battery manufacturing industry. STREAMS’ technological solutions
will meet EU requirements for environmentally responsible design, and scale up, and anticipate regulatory compliance
by conducting techno-economic, environmental, social impact and integrated risks assessments combined with life cycle
sustainability and circularity assessments. The cathode and anode active materials synthesized in STREAMS will be used
to manufacture 10 Ah battery cells at pilot scale using sustainable electrode processing. Prototype cells will be
tested according to established standards and subjected to advanced post-mortem characterization. STREAM will also
identify optimal conditions for future exploitation of the project results.
Coordinator: AIT AUSTRIAN INSTITUTE OF TECHNOLOGY GMBH
Consortium Partners:
- ETI BAKIR ANONIM SIRKETI/MAZIDAGI SUBESI
- GLOCK TECHNOLOGY GMBH
- SIPOW AS
- INSTYTUT SORBTSIYI TA PROBLEM ENDOEKOLOHIYI NATSIONALNOYI AKADEMIYI NAUK UKRAYINY
- OULUN YLIOPISTO
- ACONDICIONAMIENTO TARRASENSE ASSOCIACION - LEITAT
- TREIBACHER INDUSTRIE AG
- UNIVERSITE DE LIEGE - ULIEGE
- NANOPOW AS
- TURKIYE BILIMSEL VE TEKNOLOJIK ARASTIRMA KURUMU
- SIEC BADAWCZA LUKASIEWICZ - INSTYTUT METALI NIEZELAZNYCH
- ENVIVA IDIOTIKI KEFAIOUCHIKI ETAIREIA/ENVIVA IKE
- F6S NETWORK IRELAND LIMITED - F6S IE
- UKRAINIAN RESEARCH AND DESIGN INSTITUTE OF ELECTROTHERMAL EQUIPMENT
| Engine |
|
| Layout / number of cylinders |
6 |
| Displacement |
3.4 l |
| Engine Layout |
Mid-engine |
| Horespower |
315 hp |
| @ rpm |
6,700 rpm |
| Torque |
266 lb.-ft. |
| Compression ratio |
12.5 : 1 |
| Performance |
|
| Top Track Speed |
173 mph |
| 0 - 60 mph |
4.8 s |
| Transmission |
|
| Manual Gearbox |
6-speed with dual-mass flywheel and self-adjusting clutch |
| Fuel consumption |
|
| City (estimate) |
20 |
| Highway (estimate) |
28 |
| Body |
|
| Length |
172.2 in. |
| Width |
70.9 in. |
| Height |
50.4 in. |
| Wheelbase |
97.4 in. |
| Maximum payload |
739 lbs |
| Curb weight |
2910 lbs |
| Capacities |
|
| Luggage compartment volume |
5.3 cu. ft. (front) / 4.6 cu. ft. (rear) |
| Fuel Tank Capacity |
16.9 gal. |